RailForge logo
Models HO 1:87.1

Bent Overhang Light (Long) — HO Scale — Model only

$6.99

HO scale bent storefront light: a long single-bend arm reaching out to a downlight shade on a wall mount, printed to order for 1:87 shopfronts and signboards.

Options
Model only Warm white Cool white
For adult hobbyists and collectors (ages 14+). Contains small parts — choking hazard. Not a toy.

9 currently in stock

Ordering more than 9? Extra units are printed to order.

Printed to order on SLA (resin) and mailed. Secure PayPal checkout.

In stock — ships within 1–2 business days.
Painted orders add about 1–2 business days.

  • Secure checkout Handled by PayPal
  • Made to order Printed on SLA resin
  • Ready to prime Cleaned & de-supported
  • Flat-rate US shipping Calculated at checkout
  • Arrives safely Damaged? We'll make it right
About this item

Details

The storefront light that reaches out. Where the short bent lamp tucks in close, this one runs a long horizontal arm well out from the wall before it bends down to the shade — the fixture that carries light past a deep awning or a projecting sign and lays it right over the display below. It's the detail you see striding across a wide market or grocery facade, each lamp throwing its pool of light out where the sidewalk business actually happens.

The arm is a single clean bend with a long reach, finishing in a small downlight shade. A short mounting tenon on the back plugs into a drilled hole in your structure wall, so the lamp sits flush and square on a visible bracket plate. The extra reach is the point: it clears awnings, signboards, and transoms that a short-arm lamp would light from too close, and it reads as the deliberate choice a real shopkeeper made to get light where it was needed.

Because the arm is modeled hollow, this isn't just a static casting. The bore runs the length of the arm from the shade down through the mounting tenon, so fine magnet wire can be threaded through and the leads brought out behind the wall — which is exactly how the warm-white and cool-white LED versions are built. Order it bare to light your own way, or let us wire a micro-LED through the arm so the fixture arrives ready to connect.

Run a row of them across a wide facade the way the real markets did and a flat wall becomes a storefront with reach and depth. Rust-weathered or freshly painted, they read instantly as a working block of businesses.

Specs

Specifications

  • Scale: HO (1:87.1)
  • Fixture type: Bent storefront downlight (long single-bend arm)
  • Model dimensions: 23 mm L x 7 mm W x 10 mm H (includes mounting tenon)
  • Scale reach: ~6.5 ft prototype arm reach at 1:87.1
  • Mounting: Short tenon on arm back — drill the wall, plug, glue flush
  • Arm: Hollow bore full length (shade to tenon) for wiring
  • Print process: SLA resin (fine detail on thin arm)
  • Best for: Wide shopfronts, deep awnings, projecting signs, markets

Customer reviews

No reviews yet

Own this one? Be the first to review it.

Reviews will appear here once approved.

Write a review

Your rating

Reviews are checked before they appear.